.
INCH-POUND
MIL-DTL-484J
06 February 2006
SUPERSEDING
MIL-C-484H
11 February 1985
DETAIL SPECIFICATION
CLOTH, WIND RESISTANT OXFORD, COTTON, WATER REPELLENT TREATED
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This document covers water repellent and wind resistant cotton oxford cloth.
1.2 Classification. (See 6.2.).
Type I - 6.5 to 7.2 ounces per square yard
Type VI - 5.5 to 6.7 ounces per square yard
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in Sections 3, 4 or 5 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in Sections 3, 4 or 5 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications. standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP Standardization
Team, 700 Robbins Avenue, Philadelphia, PA 19111-5092 or emailed to
https://ct.dscp.dla.mil. Since contact information can change, you may want to verify the
currency of this address information using Acquisition Streamlining and Standardization
AMSC N/A
FSC 8305
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business