A-A-52108
metallic straps not less than 1/2 by 0.020 inch or non-metallic straps not less than 7/16 by 0.030 inch.
4.2.2. Narrow-width cloth. Cloth, packed as specified, shall be stacked in a snug-fitting fiberboard shipping container conforming to style RSC, type CF variety SW or SF, class domestic, grade 275 of PPP-B-636. Each shipping container shall be closed in accordance with the appendix of PPP-B-636. The weight of the contents of each shipping container shall not exceed 55 pounds.
4.3 Palletization, Narrow-width cloth. When specified (see 5.2), cloth packed as specified, shall be palletized in accordance with load type 1a of MIL-STD-147. Each prepared load shall be bonded with primary and secondary straps in accordance with bonding means C and d or film bonding means F or G. Pallet pattern shall be in accordance with the appendix of MIL-STD-147.
4.4 Marking. In addition to any special markings required by the contract or purchase order, rolls and shipping containers shall be marked in accordance with MIL-STD-129. Each roll shall have a place ticket (identification tag) affixed with a 5-ply minimum cotton string or a plastic tag hanger. The tag shall have a reinforced eyelet and shall be legibly printed, using water insoluble ink, with the following information:
Procurement Agency
National Stock Number
Item Description
Contractor
Width
Fiber Content
Contract or Purchase Order Number
Finish or Greige Mill
Roll Number
Lot Number
Piece Number
Yardage
5. NOTES
5.1 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this document.
b. Type required (see 1.1).
c. Width of cloth required (see 2.1).
d. Color of cloth, if other than natural (see 2.1).
e. Length and put-up, if other than specified (see 2.3).
f. Palletization, if required for narrow-width cloth (see 4.3).
5.2 Sources of documents.
5.2.1 Sources of Government documents Copies of Military and Federal documents are available from:
Standardization Documents Order Desk
Building 4D
700 Robbins Avenue
Philadelphia, PA 19111-5094
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business