A-A-52108
TABLE I. Physical requirements
|
Requirements |
|||
|
Characteristics |
Type I |
Type II |
Test Method 1/ |
|
Weight, oz/sq. yd. (min) |
5.8 |
4.5 |
5041 |
|
Yarns per inch (min): |
|
|
|
|
Warp |
29 |
30 |
5050 |
|
Filling |
22 |
24 |
5050 |
|
Stiffness inch-pound filling: |
|
|
|
|
Minimum |
0.100 |
0.060 |
5202 |
|
Maximum |
0.210 |
0.101 |
5202 |
|
Shrinkage percent (max): |
|
|
|
|
warp |
2.0 |
2.0 |
5552 |
1/ The test method indicated, from FED-STD-191 Textile Test Method, have been found acceptable to determine if the cloth meets the stated requirements. If the Government requires proof that the cloth meets the stated requirements, the test methods indicated shall be used.
2.3 Length and put-up.
2.3.1 Full width. Unless otherwise specified (see 5.1), the cloth shall be furnished in continuous lengths of not less than 40 yards. The cloth shall be put-up full width on rolls as specified in 4.1.
2.3.2. Narrow width. Unless otherwise specified (see 5.1), the cloth shall be furnished in continuous lengths of not less than 140 yards ± 10 yards put-up on rolls as specified in 4.1.
3. QUALITY ASSURANCE
3.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specification, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business