A-A-52098
snug-fitting double-walled fiberboard container known as a double cover, and shall consist of a body or joined liner and two covers. Corrugated fiberboard with a minimum bursting strength of 500 pounds shall be used. The container shall be strapped with metallic straps not less than 1/2 by 0.020 inch or non-metallic straps not less than 7/16 by 0.030 inch.
3.3 Marking. In addition to any special marking required by the contract or purchase order, rolls and shipping containers shall be marked in accordance with MIL-STD-129. Each roll shall have a piece ticket (identification tag) affixed with a 5-ply minimum cotton string or a plastic tag hanger. The tag shall have a reinforced eyelet and shall be legibly printed, using water insoluble ink, with the following information:
Procurement Agency
National Stock Number
Item Description
Contractor
Width
Fiber Content
Contractor or Purchase Order Number
Finish or Greige Mill
Roll Number
Lot Number
Piece Number
Yardage
4. NOTES
4.1 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this document.
b. Width of cloth required (see 1.1).
c. Length and put-up, if other than specified (see 1.3).
4.2 Sources of documents.
4.2.1 Source of Government documents. Copies of Military and Federal documents are available from:
Standardization Documents Order Desk
Building 4D
700 Robbins Avenue
Philadelphia, PA 19111-5094
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business