A-A-1491C
6. PREPARATION FOR DELIVERY
6.1 Packaging, packing, and marking. The packaging, packing, and marking shall be as specified in the contract or order.
7. NOTES
7.1 Part Identification Number (PIN). Cheesecloth conforming with this commercial item description shall be identified by a part number configuration consisting of identification of a portion of the CID number, item, and type. An example of a part number configuration is shown below. This part numbering system is intended for identification and cross-indexing of the item within the federal cataloging system. The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor.
AA149A1 Example: AA1491A1 = Item 1, Type I
AA149- General Commercial Item Description Number
A= Item (A= Item 1, B= Item 2)
1= Type (1= Type I, 2= Type II, or 3= Type III)
7.2 Source of documents.
Copies of Rules and Regulations under the Textile Fiber Products Identification Act are available from the Federal Trade Commission, Washington, DC 20580.
Copies of ASTM standards are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
7.3 Ordering data. Purchasers should select the preferred options permitted herein and include the following information in procurement documents (if applicable).
a) Title, number and date of this commercial item description.
b) Item and type required.
c) Length required (see 3.3.1).
d) The packaging, packing and marking desired.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business