MIL-DTL-44050B
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
V-T-295
-
Thread, Nylon
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-32072
-
Thread, Polyester
MIL-DTL-46593
-
Projectile, Calibers .22, .30, .50, and 20MM
Fragment-Simulating
DEPARTMENT OF DEFENSE STANDARDS
V50 Ballistic Test for Armor
MIL-STD-662
-
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other
Government documents, drawings, and publications form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
FEDERAL TRADE COMMISSION
Rules and Regulations under the Trade Fiber Products Identifications Act
(Copies of this document are available online at https://www.ftc.gov/ or from the Federal Trade
Commission, Pennsylvania Avenue at Sixth Street, N.W, Washington, DC 20580.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business