MIL-DTL-44031E
(Copies of these documents are available on line at https://www.astm.org or from the ASTM
INTERNATIONAL, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-
2959.)
OTHER PUBLICATIONS
Principles and Methods of Toxicology, Repeat Insult Patch Test - Modified Draize Procedure -
(fourth edition) A Wallace Hayes (editor), pp 1057 1060, 2001.
(Copies
are available online at https://www.taylorandfrancis.co.uk/ or from Taylor and Francis,
325 Chestnut Street, Philadelphia PA 19106 .)
Sears Roebuck and Co.
Sears Fabric Defect Replica Scales
(Copies available from Sears Roebuck and Co., "Fabric Defect Replica Kit" Dept 817 (ATTN:
FC 554B), 3333 Beverly Road, HG, FC568B, Hoffman Estates, IL 60179). For information call
(847-286-8952.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.2 Standard sample. The finished cloth shall match the standard sample for shade and
appearance and shall, unless otherwise indicated, be equal to or better than the standard sample
with respect to all characteristics for which the standard sample is referenced (see 6.4).
3.3 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible, provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
3.4 Materials.
3.4.1 Cotton. The cotton shall be carded.
3.4.2 Nylon. The nylon shall be first quality, high tenacity, semi-dull staple having a
nominal cut length of 1-1/2 inches and a round cross section with a nominal denier of 2.25 to
2.50. No form of nylon waste shall be used, such as undrawn fiber, mixtures of deniers, lusters
or cross sections, and waste from any stage of fiber production: whether drawn, un-drawn, or
mixed or garneted fiber. Testing shall be as specified in 4.4.3.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business