MIL-DTL-43992C
ASTM INTERNATIONAL
ASTM-D-276
-
Identification of Fibers in Textiles
ASTM-D-629
-
Quantitative Analysis of Textiles
ASTM-D-1424
-
Tearing Strength of Fabrics by Falling-Pendulum
Type (Elmendorf) Apparatus
ASTM-D-1683
-
Failure in Seams of Woven Fabrics
ASTM-D-3775
-
Fabric Count of Woven Fabrics
ASTM-D-3776
-
Mass Per Unit Area (Weight) of Fabric
ASTM-D-5034
-
Breaking Strength and Elongation of Textile
Fabrics (Grab Test)
(Application for copies should be addressed to ASTM International, 100 Barr Harbor Drive,
West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3.
REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to the first article
inspection (see 6.3) in accordance with 4.3.
3.2 Standard sample. The finished cloth shall match the standard sample for shade and
appearance and shall be equal to or better than the standard sample with respect to all
characteristics for which the standard sample is referenced (see 6.4).
3.3 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs. The use of recycled fiber in the production of this
fabric is prohibited.
3.3.1 Fibers.
3.3.1.1 Polyester fiber. The fiber shall be an environmentally acceptable polyethylene
terephthalate.
3.3.1.2 Cotton. The cotton shall be carded and combed.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business