MIL-DTL-43685C
TABLE II. End item visual defects.
Classification
Examine
Defect
Major
Minor
Twist or distortion
Webbing or tape will not lay flat
upon application of manual
pressure due to twist or distortion.
201
Cut, hole, or tear
Any cut, hole or tear.
101
Drop-ply
Clearly visible on more than two
ends within same length and
extending over 9 linear inches or
more. 1/
102
Clearly visible on one or two ends
within same length and extending
over 9 linear inches or more. 1/
202
Edges
Frayed, slack or otherwise poorly
constructed and exceeding 1/4 inch
in length.
103
Knots
More than one knot in any 9 linear
inches.
104
More than one knot every 2 yards
with untrimmed ends extending
from surface of webbing.
203
Mispick
Two or more across the full width.
105
Width
Beyond specified tolerances.
204
1/ Clearly visible at normal inspection distance (approximately 3 feet).
4.4.1 Overall examination. The webbing and tape shall be examined for the defects listed
below. Each defect listed shall be counted not more than once in each roll examined. The
sample shall consist of the applicable number of rolls indicated below.
Defects
Off shade
Uneven weaving throughout
Not labeled in accordance with Textile Fiber Products Identification Act
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business