MIL-DTL-21115L
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or order (see 6.2). When actual packaging of material is to be performed by DoD or
in-house contractor personnel, these personnel need to contact the responsible packaging activity
to ascertain requisite packaging requirements. Packaging requirements are maintained by the
Inventory Control Point's packaging activity within the Military Department or Defense Agency,
or within the military service's system commands. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is
not mandatory.)
6.1 Intended use. Type I, Class 2 and Type III, Class 2 cloths are used for neckties. Type I,
Class 1, and Type III, Class 1, 3, and 4 cloths are intended for use in the manufacturing of shirts,
coats, and trousers for officers and enlisted personnel of the Department of Defense.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification.
b. Type and class of cloth required (see 1.2).
c. ASSIST will be cited in the solicitation, and if required, the specific issue of
individual documents referenced (see 2.2).
d. When first article is required (see 3.1 and 4.2).
e. Color required (see 3.5).
f. Width required if other than 60 inches (see 3.6.1).
g. Length required if other than specified (see 3.8).
h. Packaging (see 5.1).
6.3 Standard sample. For access to samples, address the contracting activity issuing the
invitation for bids or request for proposal.
6.4 Photograph Rating Standard. The Photograph Rating Standards are available from
ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19426-2959.
6.5 Fabric defect scales. Fabric Defect Replica Kits are available from Sears Roebuck and
Company, Department 817, (ATTN: BSC 23-29), Sears Tower, Chicago, IL 60684.
6.6 Certificate of compliance. When certificates of compliance are submitted, the
Government reserves the right to inspect such items to determine the validity of the certification.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business