MIL-DTL-10176K
AMERICAN SOCIETY FOR QUALITY
ANSI/ASCQ Z1.4 Sampling Procedures and Tables for Inspection of Attributes
(Copies of documents are available on line at www.asq.org or from the American Society for
Quality, 600 Plankinton Avenue, Milwaukee, WI 53203.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection (see 4.2).
3.2 Standard sample. The finished cloth shall match the standard sample for shade and
appearance and shall be equal to or better than the standard sample with respect to all
characteristics for which the standard sample is referenced (see 6.4).
3.3 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible, provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
3.4 Material.
3.4.1 Stock.
3.4.1.1 Grade. The wool for the cloth shall be not lower in grade than the U.S. Standard
grades specified below for the applicable class, when tested as specified in 4.3.1.1.
Classes 1, 3 and 7
- 62's U.S. Standard
Classes 5, 8, 9, 10, 11, 12 and 13 - 64's U.S. Standard
3.4.1.2 Wool. The wool top for Type I cloth shall be fleece or pulled wool, or both, not
lower in grade than that specified for the applicable class (see 1.2 and 3.4.1.1). The use of wool
top made from laps, noils, or any other wool manufacturing by-products is prohibited (see 4.3.2).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business