A-A-52105
Table I. Physical requirements (cont’d)
|
Requirements |
||||
|
Characteristics |
Type I |
Type II |
Type III |
Test Method 1/ |
|
Breaking strength, lbs. (min): |
|
|
|
|
|
Warp |
50 |
50 |
50 |
5100 |
|
Filling |
45 |
45 |
45 |
5100 |
|
Stiffness, 4/ load-pounds (min): (filling only) |
0.005 |
0.011 |
0.016 |
5202 |
|
Shrinkage, percent (max) |
|
|
|
|
|
Warp |
3.0 |
3.0 |
3.0 |
5558 5/ |
|
Filling |
2.0 |
2.0 |
2.0 |
5558 5/ |
1/ The test method indicated, from FED-STD-191 Textile Test Method, have been found acceptable to determine if the cloth meets the stated requirements. If the Government requires proof that the cloth meets the stated requirements, the test methods indicated shall be used.
2/ The percent animal fiber content of the finished cloth shall be based on the dry desized weight of the specimen.
3/ The dyed and finished cloth shall contain no more labile sulfur than shown by standard sample. When a standard sample is not available the cloth shall show not more than a “slight” trace of labile sulfur as defined in the test method.
4/ Measured parallel with the filling direction.
5/ Method 5558 shall be used except that the specimen shall be dried as specified in Method 5550. The cloth shall be kept submerged for a period of 30 minutes in water containing a minimum amount of a suitable wetting agent to thoroughly wet out the fabric.
2.3 Length and put-up. Unless otherwise specified (see 5.1), the cloth shall be furnished in continuous lengths of not less than 40 yards. The cloth shall be put-up full width on rolls as specified in 4.1.
3. QUALITY ASSURANCE
3.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specification, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business