MIL-PRF-20696F
(Applications for copies of referenced documents should be addressed to U. S. Army
Center for Health Promotion and Preventative Medicine, ATTN: MCHB-DC-TTE, Bldg. E-
2100, Aberdeen Proving Grounds, MD 21010-5442.)
TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY (TAPPI)
(Applications for copies of referenced documents should be addressed to TAPPI Press,
Technology Park/Atlanta, P.O. Box 105113, Atlanta, GA 30348-5113.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE J 1966 - Lubricating Oil, Aircraft Piston Engine (Nondispersant Mineral Oil), Standard
(Applications for copies of referenced documents should be addressed to the Society of
Automotive Engineers, Publications Division, 400 Commonwealth Drive, Warrendale, PA
15096-0001.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection, in accordance with 4.3.
3.2 Standard sample. The cloth shall match the standard sample for shade and appearance
and shall be equal to or better than the sample for colorfastness (see 6.3).
3.3 Materials.
3.3.1 Dusting powder. If dusting powder is used on the cloth, it shall be whiting, talc, or
other finely divided mineralmaterial that does not support mildew growth. Talc shall not
contain asbestos and whiting shall contain less than 1% quartz. Only the minimum amount of
dusting powder necessary to prevent blocking should be applied.
3.4 Performance requirements. The cloth shall conform to the requirements specified in
Table I and 3.4 through 3.7. The cloth shall be compatible with state of the art seam sealing
materials and technology. The cloth may be dusted on both sides with the dusting powder
specified in 3.3.1 to prevent blocking. If dusting powder is used, the side(s) of the cloth
containing the dusting powder shall show not less than "good" resistance to dry crocking.
3.4.1 Color. The color of the cloth shall match the applicable color number of FED-STD-595
or shall match the approved color standard for the color specified where such a standard is
applicable (see 6.2 and 6.3).
3.4.2 Toxicity. The cloth shall not be toxic to the skin, eyes or epidermis when used as
intended (see 4.4.13).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business