MIL-DTL-44436B
The swatches shall be submitted to the following:
Commander
DLA Testing Center
Naval Support Station Philadelphia
700 Robbins Ave(Building 5 D)
Philadelphia. Pa. 19111-5098
4.4.3 Roll identification examination. During the yard-by-yard examination, each roll in the
sample shall be examined that each roll is labeled or ticketed for fiber content in accordance with
the Rules and Regulations under the Textile Fiber Products Identification Act.
4.4.4 End item testing. The cloth(s) shall be tested for the characteristics listed in Table X if
applicable. The methods of testing as specified wherever applicable and as listed in Table X
shall be followed. All test reports shall contain the individual values utilized in expressing the
final results. The sample unit shall be 5 continuous yards full width of the finished cloth for all
physical and chemical tests. The lot shall be unacceptable if one or more sample units or the lot
average for dimensional stability fail to meet any requirement specified. The sample size shall
be in accordance with the following:
Lot size (yards)
Sample size (sample units)
800 or less
2
801 up to and including 22,000
3
22,001 and over
5
TABLE X. End item tests.
Requirement
Characteristic
paragraph
Test
Material
Cotton:
Identification
3.4.1
AATCC-20 or ASTM D 276 1/
Combed cotton
3.4.1
Nylon:
Identification
3.4.2
AATCC-20 or ASTM D 276 1/
Luster
3.4.2
Denier
3.4.2
Absence of nylon waste
3.4.2
Fiber content:
Cotton content
3.4.3
AATCC-20A or ASTM D 629 1/, 2/
Nylon content
3.4.3
AATCC-20A or ASTM D 629 1/
Yarn Ply
3.4.3
Visual 3/
Presence of labile sulfur
3.5.2
4.5.1
Visual shade matching (all classes)
3.5.3
4/
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business