INCH-POUND
MIL-DTL-43191J
16 May 2005
SUPERSEDING
MIL-C-43191H
29 November 1991
DETAIL SPECIFICATION
CLOTH, WIND RESISTANT SATEEN, COTTON AND NYLON
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers wind resistant sateen cloth made of cotton and nylon
blend.
1.2 Classification. (see 6.2).
Class 1 Dyed
Class 2 Dyed, Water Repellent Treated (Quarpel Type)
Class 3 Woodland Camouflage Printed, Water Repellent Treated (Quarpel Type)
Class 4 Desert Camouflage Printed (6 color), Water Repellent Treated (Quarpel Type)
Class 5 Desert Camouflage Printed (3 color), Water Repellent Treated (Quarpel Type)
Class 6 Universal Camouflage Printed, Water Repellent Treated (Quarpel Type)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-COET (Bldg 6),
700 Robbins Avenue, Philadelphia, PA 19111-5092 or emailed to: trina.gooding@dla.mil.
Since contact information can change, you may want to verify the currency of this address
information using Acquisition Streamlining and Standardization Information System
MILSTARYonline database at https://assist.daps.dla.mil .
(A I SIST)
AMSC N/A
FSC 8305
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business