MIL-DTL-31011B
3.9.2 Class 2, Desert Camouflage. The color of the face side of the cloth shall be Desert
Camouflage pattern and shall match Light Tan 492, Light Khaki 494, and light Brown 493.
Each area of the specific color of the pattern shall be in accordance with the applicable standard
sample. The color of the back side of the cloth shall be Light Tan 492 or show Desert
Camouflage strike-thru from the face side print.. Both sides of the cloth shall match the
respective side of the standard sample.
3.9.3 Class 3, Air Force Blue. The color of the face side of the cloth shall be Air Force Blue,
Shade 1613 (see 6.2). The color of the back side of the cloth shall approximate Air Force Blue
Shade 1613.
3.9.4 Class 4, Universal Camouflage. The color of the face side of the cloth shall be Universal
Camouflage pattern and shall match Desert Sand 500, Urban Gray 501, and Foliage Green 502.
Each area of the specific color of the pattern shall be in accordance with the applicable standard
sample. The color of the back side of the cloth shall be Foliage Green 504 or show Universal
Camouflage strike-thru from the face side print. Both sides of the cloth shall match the
respective side of the standard sample.
3.10 Pattern Execution.
3.10.1 Class 1, Woodland Camouflage pattern execution. The Woodland Camouflage pattern
shall reproduce the standard sample in respect to design, colors and registration of the respective
areas. The pattern repeat of the dyed, printed, and finished cloth shall be 27.25 inches (+2.50
inches, -2.50 inches) in the warp direction. The various areas of the pattern shall be properly
registered in relation to each other and shall present definite sharp demarcations with a minimum
of feathering or spew. Each pattern area shall show solid coverage; skitteriness exceeding that
shown by the standard sample in any of the printed areas shall not be acceptable. When the
standard sample is not referenced for pattern execution or design, a pattern drawing shall be
provided, and the pattern on the finished cloth shall match that of drawing 2-1-1516B.
3.10.1 Class 2, Desert Camouflage pattern execution. The Desert Camouflage pattern shall
reproduce the standard sample in respect to design, colors and registration of the respective
areas. The pattern repeat of the dyed, printed, and finished cloth shall be 16.75 inches (+1.25
inches, -1.75 inches) in the warp direction. The various areas of the pattern shall be properly
registered in relation to each other and shall present definite sharp demarcations with a minimum
of feathering or spew. Each pattern area shall show solid coverage; skitteriness exceeding that
shown by the standard sample in any of the printed areas shall not be acceptable. When the
standard sample is not referenced for pattern execution or design, a pattern drawing shall be
provided, and the pattern on the finished cloth shall match that of drawing 2-1-2240.
3.10.1 Class 4, Universal Camouflage pattern execution. The Universal Camouflage pattern
shall reproduce the standard sample in respect to design, colors and registration of the respective
areas. The pattern repeat of the dyed, printed, and finished cloth shall be 36.00 inches (+1.25
inches, -2.50 inches) in the warp direction. The various areas of the pattern shall be properly
registered in relation to each other and shall present definite sharp demarcations with a minimum
of feathering or spew. Each pattern area shall show solid coverage; skitteriness exceeding that
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business