MIL-DTL-24671C(SH)
5. PACKAGING
5.1 Preservation. Cloths shall be packaged in heat sealed green polyethylene bags in
quantities of 100 of the same type, grade, and class. Polyethylene bags shall be free of holes
or tears and heat seals shall be tightly adherent to prevent tearing in this area. Cloths shall be
flat or folded.
5.2 Packing. Unless additional requirements are specified by the purchaser, material
shall be prepared for shipment in accordance with commercial practice to ensure delivery of
product in full compliance with this specification.
5.3 Marking. Shipments shall be marked in accordance with MIL-STD-129. Each bag
shall be labeled or permanently marked with type, grade, and class of cloth, contract number,
and National Stock Number (if applicable).
6. NOTES
6.1 Intended use. The cloth shall be used for components requiring high levels of
cleanliness. Grade 1 cloths shall be used for flushing filter or wiping cloth cleanliness
inspection. Grade 2 cloths shall be used for cleaning only. Grade 1 cloths may also be used for
cleaning.
6.2 Acquisition requirements. Acquisition documents must specify the following:
(a)
Title, number, and date of this specification.
(b)
Type, grade, and class of cloth (see 1.2).
(c)
Dimensions of Class C cloth (see 3.2.1).
6.3 Definitions.
6.3.1 Fabric. Material supplied in bolts by the manufacturer, or pieces thereof.
6.3.2 Cloth. Hemmed fabric which meets the classification requirements of 1.2.
6.4 Changes from previous issue. The margins of this specification are marked with
vertical lines to indicate where changes (additions, modifications, corrections, deletions) from
the previous issue were made. This was done as a convenience only and the Government
assumes no liability whatsoever for any inaccuracies in these notations. Bidders and
contractors are cautioned to evaluate the requirements of this document based on the entire
content irrespective of the marginal notations and relationship to the last previous issue.
Preparing activity:
Navy - SH
Project 8305-0815
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business