A-A-52107
Alternately, a maximum of 325 pounds of rolls of kraft wrapped cloth shall be packed in a snug-fitting double-walled fiberboard container known as a double cover, and shall consist of a body or joined liner and two covers. Corrugated fiberboard with a minimum bursting strength of 500 pounds shall be used. The container shall be strapped with metallic straps not less than 1/2 by 0.20 inch or non-metallic straps not less 7/16 by 0.030 inch.
4.3 Marking. In addition to any special markings required by the contract or purchase order, rolls and shipping containers shall be marked in accordance with MIL-STD-129. Each roll shall have a piece ticket (identification tag) affixed with a 5-ply minimum cotton string or a plastic tag hanger. The tag shall have a reinforced eyelet and shall be legibly printed, using water insoluble ink, with the following information:
Procurement Agency
National Stock Number
Item Description
Contractor
Width
Fiber Content
Contract or Purchase Order Number
Finish or Greige Mill
Roll Number
Lot Number
Piece Number
Yardage
5. NOTES
5.1 Acquisition requirements. acquisition documents must specify the following:
a. Title, number and date of this document.
b. Type of cloth required (see 1.1)
c. Width of cloth required (see 2.1)
d. Color of cloth required (see 2.1)
e. Length and put-up if other than specified (see 2.3).
5.2 Sources of documents.
5.2.1 Source of nongovernment association documents.
AATCC Chromatic Transference Scale is available from:
American Association of Textile Chemists and Colorists (AATCC)
P.O. Box 12215
Research Triangle Park, NC 27709-2215
5.2.2 Source of Government documents. Copies of Military and Federal documents are available from:
Standardization Documents Order Desk
Building 4D
700 Robbins Avenue
Philadelphia, PA 19111-5094
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business