A-A-52086
TABLE I Cloth physical requirements
|
Characteristics |
Requirements |
Test Method |
|
Weight. Oz, sq. yd. (min) |
7 0 |
50( ) |
|
Yarns per inch (min) |
|
|
|
Warp |
50 |
5050 |
|
Filling |
35 |
5050 |
|
Breaking strength, lbs (min) |
|
|
|
Warp |
75 |
5100 |
|
Filling |
65 |
5100 |
|
Stiffness, load-lbs |
|
|
|
Warp |
0.002 – 0.10 |
5202 |
|
Filling |
0.1 – 0.3 |
5202 |
|
Shrinkage, percent (max) |
|
|
|
Warp and filling |
4.0 |
5550 |
1/ The test method indicated, from FED-STD-191 Textile Test Method, have been found acceptable to determine if the cloth meets the stated requirements. If the Government requires proof that the cloth meets the stated requirements, the test methods indicated shall be used.
2. QUALITY ASSURANCE
2.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specification, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
2.2 Visual examination. Lots of cloth shall be inspected in accordance with MIL-STD-105. The inspection level shall be II and the acceptable quality level (AQL), expressed in terms of defects per hundred units, shall be 6.5. The lot size shall be expressed in units of yards. The sample unit shall be one linear yard. The cloth shall be examined for the following defects: hole, cut, tear, missing end or pick, thick or thin areas, permanent crease, slubs, slugs or gout, shade bar, streaks, spots, stains or uneven dying.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business