A-A-50145
April 20, 1988
SUPERSEDING
(See 5.4)
COMMERCIAL ITEM DESCRIPTION
CLOTH, SHEETING, COTTON, AND POLYESTER/COTTON, WHITE
The General Services Administration has authorized the use of this commercial item description in preference to type II of Federal Specification CCC-C-430.
1. CLASSIFICATION
1.1 Classification. The cloth shall be of the following types, classes and counts:
Type I – Cotton, 100 percent
Class 1 – Unshrunk
Class 2 – Shrunk
140 count
128 count
Type II – Polyester/cotton blend
Class 1 – Unshrunk
Class 2 – Shrunk
122 count
177 count
2. SALIENT CHARACTERISTICS
2.1 Design and construction. The cloth shall be bleached white end of a plain weave construction. The type I cloth shall be made from carded, drawn, and spun cotton. The type II cloth shall be made from a blend of polyester and cotton. The blend shall contain a minimum of 30 percent cotton. The finished cloth shall conform to the physical properties listed in table I when tested in accordance with the cited methods. The width of cloth shall be as specified.
2.2 Put-up. The cloth shall be rolled in continuous lengths and each length shall be not less than 50 yards. Each roll shall weigh approximately 125 pounds.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business