A-A-50128A
The weight of the cloth shall be 1.6 ounces per square yard minimum for Type I and 5.6 ounces per square yard minimum for Type II when tested according to ASTM D1117, Section 17. The breaking strength of the cloth in the machine direction shall be 7 pounds minimum for Type I and 100 pounds minimum for Type II when tested according to ASTM D1117, Section 7. The breaking strength of the cloth in the cross-machine direction shall be 15 pounds for Type I and 80 pounds for Type II when tested according to ASTM D1117, Section 7. The shrinkage of the cloth in the machine direction shall be 2.0 percent maximum for Type I and 3.0 maximum for Type II when tested according to AATCC 135, Method IIB. The shrinkage of the cloth in the cross-machine direction shall be 2.0 percent maximum for Type I and Type II when tested according to AATCC 135, Method IIB.
2.2 Put-up. Put-up shall be as specified in the contract or order.
3. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4. QUALITY ASSURANCE PROVISIONS.
4.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
4.2 Market acceptability criteria. The item offered, or a generic equivalent, must have been sold to the commercial market or the Government for at least 2 years.
4.3 Defects. The cloth shall be inspected for the following defects: Spots, stains; holes, cuts or tears; baggy, ridgy or wavy cloth; width less than specified; overall uncleanliness; oily filling; crease; mill wrinkle; excessive nippiness; missing fusible adhesive; wrinkle mark; seam mark; dots per square inch less than specified; hard crease.
5. PACKAGING.
5.1 Preservation, packing and marking. The preservation, packing, and marking shall be as specified in the contract or order.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business