November 1, 2005
20 September 1989
WEBBING AND TAPE, TEXTILE, ARAMID FIBER
This specification is approved for use by all Departments and Agencies of the Department of
1.1 Scope. This specification covers webbing and tape made from aramid fiber.
1.2 Classification. (see 6.2)
Type I - Double woven webbing
Type II - Single woven tape
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of the list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3 or 4 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications. standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-COET (Bldg 6),
Since contact information can change, you may want to verify the currency of this address
information using Acquisition Streamlining and Standardization Information System
(ASSIST) online database at https://assist.daps.dla.mil.
© Copyright 2015 Integrated Publishing, Inc.